Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
To replace the hard drive panel, do step 3 in reverse: Place the panel back in its original position and press down.
  • To replace the hard drive panel, do step 3 in reverse:

  • Place the panel back in its original position and press down.

  • If the hard drive was removed or replaced during this process, improper installation may prevent the hard drive panel from sitting in the slots properly.

  • With the bit driver and Phillips bit, replace the two retaining screws to secure the cover plate in place.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.