Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
To remove the relay board, remove the connector marked in blue and screw circled in purple. Lift up on the card.
  • To remove the relay board, remove the connector marked in blue and screw circled in purple.

  • Lift up on the card.

  • Detach the cable marked in green and remove the relay card from the device. Note, do not try remove this cable from the card the other end is soldered onto the board.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.