Traduzione in corso passo 10
Passo 10
De-solder the Arm
-
On the top of the drone, you should notice the 12 wires shown in the 1st image. These wires control the front right & left arms. You will need to de-solder the wires corresponding to the arm you are replacing.
-
The red line shown in the image separates the wires into two groups. The wires on the left, power the left arm; the wires on the right, power the right arm.
-
Once you de-solder the wires (and assuming you've disconnected the antenna cable), the arm should be completely removable.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.