Xbox Series X Vervanging van het moederbord en de koellichaammodule

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Traduzione in corso passo 2

Inglese

Olandese

Passo 2

Pinch the locking tab on the interconnect cable on the motherboard and use the flat end of a spudger to disengage the clip.
Use your fingers to pull the connector straight up and out of its socket.
During reassembly, insert the #1—SOC side of interconnect cable connector into its socket so the locking tab is facing outward. Then, press down on the edges of the connector until it snaps into place.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.