Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 3le guide che includono questo passo.
Traduzione in corso passo 4
Passo 4
Remove front lens board
-
Unscrew four #00 X mm screws.
-
Unsolder one white wire.
-
Unsolder one pink wire.
-
Unsolder one light green wire.
-
Check the mounting points for shim washers. If they are loose, note the position and remove.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.