Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
Remove the Taptic Engine cover
-
Use a Phillips screwdriver to remove the three screws securing the Taptic Engine cover:
-
One 2.9 mm‑long screw
-
One 1.3 mm‑long screw
-
One 2.4 mm‑long screw
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.