Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 6

Passo 6
Insert the tip of a spudger into the opening located near the top right corner of the microphone assembly. Carefully pry the spudger upwards against the rear case to dislodge the microphone assembly from the adhesive securing it to the rear case. Lift and remove the microphone assembly from the iPad.
  • Insert the tip of a spudger into the opening located near the top right corner of the microphone assembly.

  • Carefully pry the spudger upwards against the rear case to dislodge the microphone assembly from the adhesive securing it to the rear case.

  • Lift and remove the microphone assembly from the iPad.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.