Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 11

Passo 11
Put the upper housing back on the drill. make sure that the upper housing lines up with the lower housing screw holes.
  • Put the upper housing back on the drill. make sure that the upper housing lines up with the lower housing screw holes.

  • Put all eight screws back in the slots.

  • Tighten the screws back into place with the Phillips head screwdriver.

  • After the screws are back in place, make sure they are all snug.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.