Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 7

Passo 7
Install new motor. Attach wires to the new motor; make sure that the red wire is inserted back into the positive terminal on the new motor. The positive terminal is denoted by a (+) symbol.
  • Install new motor.

  • Attach wires to the new motor; make sure that the red wire is inserted back into the positive terminal on the new motor. The positive terminal is denoted by a (+) symbol.

  • The white wire will be inserted back into the negative terminal on the new motor. The negative terminal is denoted by the (-) symbol.

  • Make sure that the motor sits in the lower housing with the two terminals vertically in line, with the positive/red terminal on top.

  • The motor should fit snugly in the lower housing.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.