Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 9

Passo 9
Pull off the 3D analog stick gently to ensure that all solder connections are unsoldered. Remove the analog stick Put the new 3D analog stick in place. Make sure that it is seated flush against the board.
  • Pull off the 3D analog stick gently to ensure that all solder connections are unsoldered.

  • Remove the analog stick

  • Put the new 3D analog stick in place. Make sure that it is seated flush against the board.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.