Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Tilt the bottom case slightly toward the trigger buttons to slide it off the top case Here is a view of the inside of the controller. Note the vibration motors having different counter weights. Remove the connector from the left motor (controller is positioned upside down, left controller will be shown right etc.)
  • Tilt the bottom case slightly toward the trigger buttons to slide it off the top case

  • Here is a view of the inside of the controller. Note the vibration motors having different counter weights.

  • Remove the connector from the left motor (controller is positioned upside down, left controller will be shown right etc.)

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.