Aggiusta le tue cose Community Store

Come sostituire l'adesivo del vetro posteriore del tuo iPhone

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 12le guide che includono questo passo.

Torna alla Guida
Inglese
Italiano
Passo precedente Passo successivo

Traduzione in corso passo 7

Passo 7
iPhone 16 Pro Max Back Glass Installation: passo 0, immagine 1 di 3 iPhone 16 Pro Max Back Glass Installation: passo 0, immagine 2 di 3 iPhone 16 Pro Max Back Glass Installation: passo 0, immagine 3 di 3

  • Continue peeling away the liner from the adhesive, gently pressing the adhesive into place.

  • If you've correctly aligned the adhesive, the edges will fall perfectly into place.

  • If your adhesive is slightly misaligned, gently pull the long edges into alignment with the frame.

  • If the adhesive begins to crease or wrinkle, remove it and start over with fresh adhesive.

  • If you don't have another set of adhesive strips handy, it's okay to temporarily put your iPhone back together and use it normally without any adhesive. Just keep in mind that your iPhone's water resistance will be compromised until you replace the adhesive.

Applica l'adesivo lungo i lati dell'iPhone, staccando la pellicola blu man mano che procedi.

Se il tuo adesivo non è perfettamente dritto, allinea i bordi lunghi con il frame.

-[* black] Apply the adhesive up the sides of the iPhone, peeling the blue liner as you go.
-[* black] If your adhesive isn't perfectly straight, pull the long edges into alignment with the frame.
+[* black] Continue peeling away the liner from the adhesive, gently pressing the adhesive into place.
+ [* icon_note] If you've correctly aligned the adhesive, the edges will fall perfectly into place.
+ [* icon_note] If your adhesive is slightly misaligned, gently pull the long edges into alignment with the frame.
+ [* icon_note] If the adhesive begins to crease or wrinkle, remove it and start over with fresh adhesive.
+[* icon_note] If you don't have another set of adhesive strips handy, it's okay to temporarily put your iPhone back together and use it normally without any adhesive. Just keep in mind that your iPhone's water resistance will be compromised until you replace the adhesive.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.