Aggiusta le tue cose Community Store

Xbox Series X バックパネルの交換

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Giapponese
Passo precedente Passo successivo

Traduzione in corso passo 5

Passo 5
Xbox Series X (Digital Edition) Back Panel Replacement, Remove the back panel screws: passo 0, immagine 1 di 2 Xbox Series X (Digital Edition) Back Panel Replacement, Remove the back panel screws: passo 0, immagine 2 di 2
Remove the back panel screws

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your console.

  • Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.

バックパネルのネジを外します

T8トルクスドライバーを使って、バックパネルを固定している、長さ7.4mmのネジを2本外します。

この修理作業中、各ネジの装着場所をメモ書きしておきましょう。コンソールを破損しないように、正しい位置にネジを戻してください。

[title] Remove the back panel screws
+[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your console.
[* red] Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.
-[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your console.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.