Aggiusta le tue cose Community Store

Changement panneau arrière Xbox Series X ((Digital Edition)

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Francese
Passo precedente Passo successivo

Traduzione in corso passo 5

Passo 5
Xbox Series X (Digital Edition) Back Panel Replacement, Remove the back panel screws: passo 0, immagine 1 di 2 Xbox Series X (Digital Edition) Back Panel Replacement, Remove the back panel screws: passo 0, immagine 2 di 2
Remove the back panel screws

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your console.

  • Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.

Enlevez les vis du panneau arrière

Utilisez un tournevis Torx T8 pour enlever les deux vis de 7,2 mm de long, qui fixent le panneau arrière.

Au long de cette réparation, notez l'emplacement des vis et remettez-les par la suite au même endroit, afin d'éviter tout dommage.

[title] Remove the back panel screws
+[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your console.
[* red] Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.
-[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your console.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.