Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 4

Passo 4
Here is the keyboard ribbon cable seated in the zero insertion force (Zif) connector. Release the ZIF connector to which the keyboard cable is attached, by lifting the clasp in an upward direction. Disconnect the keyboard cable from the system board. Release the Zif connector to which  the power button board cable is connected, by lifting the clasp of the Zif connector in an upward direction.
  • Here is the keyboard ribbon cable seated in the zero insertion force (Zif) connector.

  • Release the ZIF connector to which the keyboard cable is attached, by lifting the clasp in an upward direction. Disconnect the keyboard cable from the system board.

  • Release the Zif connector to which the power button board cable is connected, by lifting the clasp of the Zif connector in an upward direction.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.