Salta al contenuto principale
Inglese
Tedesco

Traduzione in corso passo 2

Passo 2
Lift the LED driver board out of its recess in the outer case, minding the DC-In cable still attaching it to the power supply.
  • Lift the LED driver board out of its recess in the outer case, minding the DC-In cable still attaching it to the power supply.

  • Disconnect the DC-In cable by depressing the locking mechanism while pulling the connector away from its socket on the LED driver board.

Hebe die LED Treiberplatine aus ihrem Sitz im äußeren Gehäuse. Denke dabei daran, dass sie über das Kabel der Gleichstromversorgung immer noch am Netzteil angeschlossen ist.

Löse das Kabel der Gleichstromversorgung, indem du auf den Sicherungsmechanismus drückst und den Stecker gleichzeitig aus seinem Sockel auf der LED Treiberplatine heraus ziehst.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.