Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
Before beginning, unplug your iMac and lay it on a soft surface as shown. Stick a suction cup near each of the two top corners of the glass panel.
  • Before beginning, unplug your iMac and lay it on a soft surface as shown.

  • Stick a suction cup near each of the two top corners of the glass panel.

  • To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.

  • If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent.

作業を始める前に、iMacの電源を切り、画像のように本体を倒して、柔らかい表面上に載せてください。

ガラスパネルの上部コーナーの2箇所に吸盤カップを取り付けます。

iFixitが販売している吸盤カップを取り付けるには、まず吸盤カップの持ち手ハンドルをガラスパネルの表面に対して水平になるように上げてください。ガラスに吸盤カップを軽く装着して、もう一方のハンドルも平行になるように上げてください。

吸盤カップがうまく装着しない場合は、ガラスパネルと吸盤カップを中性洗剤などで綺麗に拭き取ってください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.