Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 10

Passo 10
This step is for anti-glare display machines only. Skip this step if you have a glossy display. Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.
  • This step is for anti-glare display machines only. Skip this step if you have a glossy display.

  • Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.

  • One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.

  • Lift the AirPort board/cable retainer assembly out of the upper case.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.