Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 9

Passo 9
This step is for anti-glare display machines only. Skip this step if you have a glossy display. Disconnect the Bluetooth cable by pulling the male end straight away from its socket.
  • This step is for anti-glare display machines only. Skip this step if you have a glossy display.

  • Disconnect the Bluetooth cable by pulling the male end straight away from its socket.

  • Use the flat end of a spudger to carefully pry the AirPort antenna off its socket on the AirPort card.

  • Pull the connector parallel to the face of the logic board, not straight up.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.