Skip to main content
Inglese
Italiano

Traduzione in corso passo 3

Step 3
I couldn't find anything suitable in the internet, so I built one on my own in this way:
  • I couldn't find anything suitable in the internet, so I built one on my own in this way:

  • Using a steel rod of about 8 mm diameter.

  • I tried to mill three teeth with equivalent distance around the boundary of one end of the rod with an angle grinder. After that I drilled a hole perpendicularly in the center of the rod. Taddaah... a working screwdriver!

  • Now let's begin the Teardown.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.