Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
Apple sticks a small strip of clear plastic with adhesive applied to one side of the logic board behind the camera cable connector to keep it in its socket. When moving it out of the way, be sure not to break any surface-mount components off the logic board.
  • Apple sticks a small strip of clear plastic with adhesive applied to one side of the logic board behind the camera cable connector to keep it in its socket. When moving it out of the way, be sure not to break any surface-mount components off the logic board.

  • Use the tip of a spudger to rotate the plastic retainer away from the camera cable connector.

Appleは、片側に接着剤付きの透明プラスチックの小さなストリップを、カメラケーブルコネクタ裏側のロジックボードのソケットに固定するため、ロジックボードに貼り付けています。 作業の邪魔にならない場所にこのストリップを移すときは、ロジックボードに実装されたコンポーネントを破損しないようにしてください。

スパッジャーの先端を使って、カメラケーブルコネクタからプラスチックのリテイナーを回転させて外します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.