Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Italiano

Traduzione in corso passo 29

Passo 29
Pull the speakers connector towards you and away from the I/O board, marked by a yellow square. Remove the 3 screws and lift as you see in the picture Move the board a little to the left while lifting to prevent damaging the two attached USB 3.0 ports.
  • Pull the speakers connector towards you and away from the I/O board, marked by a yellow square.

  • Remove the 3 screws and lift as you see in the picture

  • Move the board a little to the left while lifting to prevent damaging the two attached USB 3.0 ports.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.