Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 8le guide che includono questo passo.
Traduzione in corso passo 11
Passo 11
Disconnect the USB board
-
Use your finger to depress the metal locking tab on the USB board cable's board connector.
-
With the metal tab depressed, place the flat end of a spudger against the insulating foam pad on the ribbon cable and pull it directly away from the connector to disconnect it.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.