Aggiusta le tue cose Community Store

Logitech G Pro X Superlight フットの交換

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Giapponese
Passo precedente

Traduzione in corso passo 6

Passo 6
Logitech G Pro X Superlight Feet Replacement, Reassembly information: passo 0, immagine 1 di 3 Logitech G Pro X Superlight Feet Replacement, Reassembly information: passo 0, immagine 2 di 3 Logitech G Pro X Superlight Feet Replacement, Reassembly information: passo 0, immagine 3 di 3
Reassembly information

  • To install a new foot:

  • If any of the feet got damaged during removal or separated from their adhesive pads, replace them.

  • Use a spudger to carefully scrape up and remove any remaining adhesive bits.

  • Use isopropyl alcohol and a microfiber cloth to thoroughly clean all adhesive residue from the foot recesses. Allow the surface to completely dry.

  • Remove the feet from their backing and firmly press them into place.

再組み立て情報

新しいフットを取り付けるには

取り外しの際にフットが破損したり、接着パッドからはがれたりした場合は、フット自体を交換してください。

スパッジャーで残っている接着剤を慎重にかき集めて除去します。

イソプロピルアルコールとマイクロファイバークロスを使用して、フットのくぼみに残った接着剤を完全に拭き取ります。表面を完全に乾燥させてください。

フットのライナーを剥がして、所定の位置にしっかりと押し付けます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.