Salta al contenuto principale

Sostituzione piedini Logitech G Pro X Superlight

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Logitech G Pro X Superlight Feet Replacement, Remove the feet: passo 0, immagine 1 di 1
Remove the feet
  • The feet are secured to the bottom of the mouse with strong adhesive. In order to cleanly remove them, the adhesive needs to be thoroughly heated.

  • Heat an iOpener and lay it on the mouse feet for one minute to heat the adhesive.

  • Alternatively, you can use a hair dryer on the Low heat setting to soften the adhesive.

  • If you're using a hair dryer, only heat the feet a few seconds at a time or you may warp the plastic shell.

I piedini sono fissati alla parte inferiore del mouse con dell'adesivo. Per rimuoverli in modo pulito, l'adesivo deve essere riscaldato bene.

Scalda un iOpener e appoggialo sui piedini del mouse per un minuto per scaldare l'adesivo.

In alternativa, puoi usare un asciugacapelli a temperatura bassa per ammorbidire l'adesivo.

Se stai usando un asciugacapelli, scalda i piedini solo qualche secondo alla volta o potresti deformare la custodia di plastica.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.