Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
Peel up the six cable loops securing the antenna cables to the upper case. In some models there are seven cable loops. Gently pull the cable loops slightly out of the channel cut into the upper case one at a time.
  • Peel up the six cable loops securing the antenna cables to the upper case.

  • In some models there are seven cable loops.

  • Gently pull the cable loops slightly out of the channel cut into the upper case one at a time.

  • Use your spudger to open up the plastic loops as you de-route the antenna cables through them.

  • Repeat this for each retaining loop until the antenna cables are free from the upper case.

上部ケースにアンテナケーブルを固定している6本のケーブルループを剥がします。

モデルによってはケーブルループが7本の場合があります。

ケーブルループを上部ケースのチャンネルカットから一度に引き抜きます。

ここに翻訳を挿入する

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.