Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Use the flat end of a spudger to gently pry between the flash assembly and back cover to separate the adhesive. Remove the flash assembly from the back cover. You may also need to transfer the camera lens and the silicon pad from the rear case. These can be removed by prying carefully with a plastic opening tool.
  • Use the flat end of a spudger to gently pry between the flash assembly and back cover to separate the adhesive.

  • Remove the flash assembly from the back cover.

  • You may also need to transfer the camera lens and the silicon pad from the rear case. These can be removed by prying carefully with a plastic opening tool.

  • Depending on the adhesive on the rear case, you may need to tape the flash assembly down to secure it.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.