Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 13

Passo 13
Gently lift the logic board assembly from the heat sink end and pull it away from the port side of the case to remove it from the Air. When replacing the logic board, insert the board's rubber edge under the port-side rubber gasket, then lower the board into place. When replacing the logic board, insert the board's rubber edge under the port-side rubber gasket, then lower the board into place.
  • Gently lift the logic board assembly from the heat sink end and pull it away from the port side of the case to remove it from the Air.

  • When replacing the logic board, insert the board's rubber edge under the port-side rubber gasket, then lower the board into place.

ヒートシンク端をロジックボードアセンブリを慎重に持ち上げて、上部ケースのポート側から引き抜いて、Air本体より取り出します。

ロジックボードを交換する際は、ボードのポート側ラバーガスケットの下にラバーエッジを差し込み、それからボードを押して固定します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.