Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 13

Passo 13
Gently lift the logic board assembly from the heat sink end and pull it away from the port side of the case to remove it from the Air. When replacing the logic board, insert the board's rubber edge under the port-side rubber gasket, then lower the board into place. When replacing the logic board, insert the board's rubber edge under the port-side rubber gasket, then lower the board into place.
  • Gently lift the logic board assembly from the heat sink end and pull it away from the port side of the case to remove it from the Air.

  • When replacing the logic board, insert the board's rubber edge under the port-side rubber gasket, then lower the board into place.

Hebe die Logic Board Einheit vorsichtig vom Kühlkörper weg. Ziehe sie dann weg von der Gehäuseseite mit den Anschlüssen und entferne sie vom Air.

Beim Einbau des Logic Boards musst du erst die Gummikante des Boards unter die Gummidichtung auf der Gehäuseseite mit den Anschlüssen einsetzen, dann das Board an seinen Platz absenken.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.