Salta al contenuto principale

Sostituzione copertura posteriore Steam Deck OLED

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 37le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Steam Deck OLED Back Cover Replacement, Unclip a handle: passo 0, immagine 1 di 3 Steam Deck OLED Back Cover Replacement, Unclip a handle: passo 0, immagine 2 di 3 Steam Deck OLED Back Cover Replacement, Unclip a handle: passo 0, immagine 3 di 3
Unclip a handle
  • Insert an opening pick at an upward angle between the back cover and the front shell near one of the triggers.

  • If you can't insert your pick here, try along the top or bottom edges of the Steam Deck OLED before sliding it toward the handle.

  • Slide your pick along the edge of the handle to release the clips securing it to the front shell.

Inserisci un plettro di apertura inclinato verso l'alto tra la copertura posteriore e il guscio anteriore vicino a uno dei grilletti.

Se non riesci a inserire il tuo plettro qui, prova lungo i bordi superiore o inferiore dello Steam Deck OLED prima di farlo scorrere verso l'impugnatura.

Fai scorrere il tuo plettro lungo il bordo dell'impugnatura per rilasciare le clip che la fissano al guscio anteriore.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.