Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Tedesco

Traduzione in corso passo 4

Passo 4
If you want to remove the plastic cover completely, I recommend opening it from the top side not to break any of the clips in the bottom. The cover is attached to the trackpad through rubber glue on the plastic grid and four clips on the bottom. It is a convenient and even a better method in order to not alter the fragile rubber feet. Take your time to slowly open the plastic cover from the top side. It is a convenient and even a better method in order to not alter the fragile rubber feet. Take your time to slowly open the plastic cover from the top side.
  • If you want to remove the plastic cover completely, I recommend opening it from the top side not to break any of the clips in the bottom. The cover is attached to the trackpad through rubber glue on the plastic grid and four clips on the bottom.

  • It is a convenient and even a better method in order to not alter the fragile rubber feet. Take your time to slowly open the plastic cover from the top side.

Wenn Du die Plastikabdeckung komplett entfernen möchtest, empfehle ich, es von der Oberseite beginnend zu öffnen, um keine Clips auf der Unterseite abzubrechen. Die Abdeckung ist mit Gummikleber am Kunststoffgitter des Gehäuses befestigt und mit 4 Clips am unteren Rand.

Es ist bequemer und vielleicht sogar eine bessere Methode, um die empfindlichen Gummifüße nicht zu beschädigen. Nimm dir genug Zeit, um die Kunststoffabdeckung langsam vom oberen Rand her zu öffnen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.