Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Tedesco

Traduzione in corso passo 3

Passo 3
Using a spudger or small flathead screwdriver, gently break the seal between the white plastic backing and the metal top near the missing foot opening. Pry up the corner slightly to allow the foot to be replaced. Place the rubber foot back in place.
  • Using a spudger or small flathead screwdriver, gently break the seal between the white plastic backing and the metal top near the missing foot opening.

  • Pry up the corner slightly to allow the foot to be replaced.

  • Place the rubber foot back in place.

  • Squeeze closed the backing and metal top (it will snap into place).

  • Click on trackpad to test.

  • Insert the battery and screw the battery cover closed.

  • A foot may again dislodge, for example when you inadvertently move a sheet of paper under the trackpad. Repeat steps as needed to replace.

Benutze einen kleinen Schlitzschraubendreher und heble behutsam die weiße Kunststoffabdeckung auf der Rückseite aus der Klebeverbindung zum Metallgehäuse.

Stemme die Ecke mit dem Schraubendreher auf.

Setze den Gummifuß wieder ein.

Drücke die Abdeckung wieder in das Gehäuse hinein. (sie wird einrasten).

Klicke auf das Trackpad um es zu testen.

Setze die Batterie ein und du bist fertig.

Das kann wieder passieren, wenn man versehentlich ein Blatt Papier unter das Trackpad legt und damit unbewusst dazu beiträgt, dass der Fuß heraus gezogen wird..

[* black] Using a spudger or small flathead screwdriver, gently break the seal between the white plastic backing and the metal toptop near the missing foot opening.
[* black] Pry up the corner withslightly to allow the screwdriverfoot to be replaced.
[* black] Using a spudger or small flathead screwdriver, gently break the seal between the white plastic backing and the metal toptop near the missing foot opening.
[* black] Pry up the corner withslightly to allow the screwdriverfoot to be replaced.
[* black] Place the rubber foot back in place.
[* black] Squeeze closed the backing and metal top (it will snap into place).
[* black] Squeeze closed the backing and metal top (it will snap into place).
[* black] Click on trackpad to test.
[* black] Insert the battery and you are donescrew the battery cover closed.
[* icon_note] ItA foot may happen again dislodge, for example when you inadvertently move inadvertently a sheet of paper under the trackpad contributing involuntarilytrackpad. Repeat steps as needed to the extraction of one of the rubber feetreplace.
[* black] Insert the battery and you are donescrew the battery cover closed.
[* icon_note] ItA foot may happen again dislodge, for example when you inadvertently move inadvertently a sheet of paper under the trackpad contributing involuntarilytrackpad. Repeat steps as needed to the extraction of one of the rubber feetreplace.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.