Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Francese

Traduzione in corso passo 11

Passo 11
Peel up and remove the antenna connector cable from its channel in the rear of the display assembly. Other carrier models may have an additional antenna cable on the opposite side of the phone. Remove this antenna from the display assembly as well. On reassembly, it will be helpful to reinstall the USB board first, and reconnect the antenna connector cable before routing it back into its channel.
  • Peel up and remove the antenna connector cable from its channel in the rear of the display assembly.

  • Other carrier models may have an additional antenna cable on the opposite side of the phone. Remove this antenna from the display assembly as well.

  • On reassembly, it will be helpful to reinstall the USB board first, and reconnect the antenna connector cable before routing it back into its channel.

Décollez et retirez le connecteur du câble de l'antenne de son canal à l'arrière de l'écran.

D'autres modèles peuvent avoir un câble d'antenne additionnel du côté opposé du téléphone. Retirez également cette antenne de l'écran.

Pour le remontage, ce serait utile de réinstaller d'abord la carte USB, puis reconnecter le connecteur du câble de l'antenne avant de l'acheminer dans son canal.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.