Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Spagnolo

Traduzione in corso passo 11

Passo 11
Peel up and remove the antenna connector cable from its channel in the rear of the display assembly. Other carrier models may have an additional antenna cable on the opposite side of the phone. Remove this antenna from the display assembly as well. On reassembly, it will be helpful to reinstall the USB board first, and reconnect the antenna connector cable before routing it back into its channel.
  • Peel up and remove the antenna connector cable from its channel in the rear of the display assembly.

  • Other carrier models may have an additional antenna cable on the opposite side of the phone. Remove this antenna from the display assembly as well.

  • On reassembly, it will be helpful to reinstall the USB board first, and reconnect the antenna connector cable before routing it back into its channel.

Despega y remueva el cable del conector de antena de su canal en la parte trasero del ensamblaje de pantalla.

Otros modelos podrían tener un cable de antena adicional en el lado opuesto del teléfono. Remueve esta antena del ensamblaje de pantalla también.

Durante el reensamblaje, será útil volver a instalar primero la placa USB y reconectar el cable de conector de la antena antes de enrutarlo de nuevo en su canal.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.