Avviso: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto sulla guida che include questo passo.
Traduzione in corso passo 5
-
Grab an adhesive strip's pull tab and slowly pull it out from underneath the battery tray.
-
Pull the adhesive strip until it's freed from under the battery tray. Give the strip plenty of time to stretch.
-
Repeat for all six adhesive strips.
-
Use your spudger to depress the piece of foam near the lower right strip as you pull.
-
Use a pipette or syringe to dispense a few drops of highly-concentrated isopropyl alcohol (over 90%) under the sections of the battery tray where the strips broke. Tilt the tablet to let the isopropyl alcohol flow underneath.
-
Wait two minutes, then use a spudger to pry up the battery tray.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.