Cisco Catalyst 2960-S Series Network Switch Fan Replacement

Passo precedente Passo successivo

Traduzione in corso passo 3

Torna alla Guida

Inglese

Giapponese

Passo 3

Cisco Catalyst 2960-S Series Network Switch Fan Replacement, Remove Stack Module or Blank Cover: passo 0, immagine 1 di 3

Cisco Catalyst 2960-S Series Network Switch Fan Replacement, Remove Stack Module or Blank Cover: passo 0, immagine 2 di 3

Cisco Catalyst 2960-S Series Network Switch Fan Replacement, Remove Stack Module or Blank Cover: passo 0, immagine 3 di 3

Remove Stack Module or Blank Cover

Your switch will have either a stacking module or blank cover at the back.
Loosen the two thumbscrews (using your screwdriver with the Phillips bit to assist if they are tight)
Using both loose screws, gently but firmly pull the module out of its slot.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.