Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 9

Passo 9
You may find it helpful to set the iMac down on its back on the table for the next couple of steps. Use the flat end of a spudger to push the clip on the side of the AC inlet cable connector inward. While holding on the release clip with the spudger, grasp the AC inlet cable, and pull the connector straight out of its socket.
  • You may find it helpful to set the iMac down on its back on the table for the next couple of steps.

  • Use the flat end of a spudger to push the clip on the side of the AC inlet cable connector inward.

  • While holding on the release clip with the spudger, grasp the AC inlet cable, and pull the connector straight out of its socket.

ここから次の2つの手順ではiMacの背面をテーブル上に乗せて上向きに作業をすると便利です。

スパッジャーの平面側先端を使ってACインレットケーブルコネクタ の横に付いているクリップを内側に向けて押します。

スパッジャーでリリースクリップを押さえながら、ACインレットケーブルをつまんで、コネクタをソケットからまっすぐ引き抜きます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.