Salta al contenuto principale

Fix Your Stuff

Right to Repair

Parts & Tools

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 9

Passo 9
You may find it helpful to set the iMac down on its back on the table for the next couple of steps. Use the flat end of a spudger to push the clip on the side of the AC inlet cable connector inward. While holding on the release clip with the spudger, grasp the AC inlet cable, and pull the connector straight out of its socket.
  • You may find it helpful to set the iMac down on its back on the table for the next couple of steps.

  • Use the flat end of a spudger to push the clip on the side of the AC inlet cable connector inward.

  • While holding on the release clip with the spudger, grasp the AC inlet cable, and pull the connector straight out of its socket.

Pour les deux prochaines étapes, il peut être utile de poser l'iMac à l'envers sur une table.

À l'aide de l'extrémité plate d'un spudger, poussez le clip sur le côté du câble d'entrée CA vers l'intérieur.

Tout en maintenant le clip de déverrouillage à l'aide du spudger, saisissez le câble d'entrée CA et débranchez le connecteur de sa prise en le tenant bien droit.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.