Skip to main content

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 1

Step 1
Pull up on the SATA power cable connector to disconnect it. Unplug the SATA data cable connector by lifting it up. Remove the SATA cable from the logic board assembly to get it out of the way and prevent it from being damaged.
  • Pull up on the SATA power cable connector to disconnect it.

  • Unplug the SATA data cable connector by lifting it up.

  • Remove the SATA cable from the logic board assembly to get it out of the way and prevent it from being damaged.

Ziehe den Verbindungsstecker der SATA Stromversorgung nach oben, um sie zu trennen.

Ziehe das SATA Datenkabel ab indem du es hochhebst.

Entferne das SATA Kabel vom Logic Board, damit es nicht beschädigt wird.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.