Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 1

Passo 1
When working on the power supply, be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. Disconnect the power supply control cable from the power supply.
Remove the power supply
  • When working on the power supply, be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

  • Disconnect the power supply control cable from the power supply.

Cuando trabajes en la fuente de alimentación, ten mucho cuidado de no tocar los cables del condensador o cualquier junta de soldadura expuesta en la parte posterior de la fuente de alimentación. Maneja solo el tablero por los bordes.

Desconecta el cable de control de la fuente de alimentación de la propia fuente.

+[title] Remove the power supply
[* icon_caution] When working on the power supply, ***be very careful*** not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
[* black] Disconnect the power supply control cable from the power supply.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.