Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Francese

Traduzione in corso passo 1

Passo 1
Verify that the console is disconnected from the AC outlet before you begin. If you have just powered off the system, give the capacitors a few minutes to discharge before you begin working. Remove the white female pin header by clamping the clip and pulling it up gently from the power board.
  • Verify that the console is disconnected from the AC outlet before you begin. If you have just powered off the system, give the capacitors a few minutes to discharge before you begin working.

  • Remove the white female pin header by clamping the clip and pulling it up gently from the power board.

Vérifiez que la console est déconnectée de la prise secteur avant de commencer. Si vous venez d'éteindre le système, donnez aux condensateurs quelques minutes le temps de se décharger avant de commencer à travailler.

Retirez la prise femelle blanche en serrant le clip et en le tirant doucement de la carte électronique de puissance.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.