Salta al contenuto principale
Cinese
Inglese

iPhone 5 Screen Replacement

Informazioni Guida

= Fatto = Incompleto

      Descrivi la parte specifica o il componente di questo device sul quale stai lavorando. Es: Batteria

      Crea un titolo.

      Questo breve sommario di 1-2 frasi apparirà nei risultati di ricerca.

      Comunica informazioni di base prima che il lettore si immerga nella guida.

      Passi Guida

      Passo 1

      Before we start, please make sure your iPhone has been turned off.

      Passo 2

      Put a small suction cup above the home button to hold the screen glass.

      Passo 3

      Pinch the suction cup in one hand and carefully lift the screen assembly.

      Passo 4

      Slowly lift the buckle along the fuselage with a plastic ignition tool.

      Passo 5

      Once buckle is open, you can move screen by pulling the suction cup.

      Passo 6

      Unscrew the three screws as shown.

      Passo 7

      Remove the small baffle.

      Passo 8

      Use a plastic tool to gently disconnect three interfaces as shown, it is similar as cloth clips, no worry to welding.

      Passo 9

      After disconnecting these three interfaces, now you can remove the screen.

      Passo 10

      Remove the two screws as shown.

      Passo 11

      Remove this small part above the speaker.

      Passo 12

      Now you can remove the speaker.

      Passo 13

      In the position shown in the picture, there is a small cable connector, which can be gently removed with a plastic tool.

      Passo 14

      After you open the interface, you can remove the front camera.

      Passo 15

      Unscrew the two screws as shown.

      Passo 16

      Before you take off the flap of Home button, you must unplug connected cables.

      Passo 17

      Remove the Home button shield and the cable.

      Passo 18

      Pry the Home button out with the plastic prying tool.

      Passo 19

      Remove the Home button.

      Passo 20

      Remove the screws as shown in the figure, each side has two.

      Passo 21

      Unscrew the two screws as shown.

      Passo 22

      Remove the LCD screen shield.

      Passo 23

      Finally you have the iPhone 5 screen with integrated components.

      I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.