Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 22

Passo 22
Be very careful handling the display—it's big, heavy, and made of glass. The display has fragile edges. Avoid lifting the display by the corners. Lift the display up from the frame and remove it from the iMac. Lay the display face down on a flat, soft surface. It may be necessary to slowly lift from one side, to peel against the remaining adhesive.
  • Be very careful handling the display—it's big, heavy, and made of glass. The display has fragile edges. Avoid lifting the display by the corners.

  • Lift the display up from the frame and remove it from the iMac. Lay the display face down on a flat, soft surface.

  • It may be necessary to slowly lift from one side, to peel against the remaining adhesive.

  • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide when your repair is complete to replace the adhesive strips that secure the display to the rear enclosure.

Ten mucho cuidado al manipular la pantalla: es grande, pesada y está hecha de vidrio. Además, tiene bordes frágiles. Evita levantar la pantalla por las esquinas.

Levanta la pantalla del marco y retírela del iMac. Coloca la pantalla hacia abajo en una superficie plana y suave.

Podría ser necesario levantar lentamente de un lado, para poder eliminar el adhesivo restante.

Después de haber cortado el adhesivo, no podrás reutilizarlo para volver a sellar la pantalla en su posición original. Sigue esta guía al completar su reparación para remplazar las tiras de adhesivo que podrán asegurar la pantalla de nuevo a la carcasa trasera.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.