Salta al contenuto principale

iMac Intel Reemplazo de pantalla de 27 "EMC 2546

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 10

Passo 10
iMac Intel 27" EMC 2546 Display Replacement: passo 0, immagine 1 di 3 iMac Intel 27" EMC 2546 Display Replacement: passo 0, immagine 2 di 3 iMac Intel 27" EMC 2546 Display Replacement: passo 0, immagine 3 di 3
  • While the opening tool did the lion's share of the work, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.

  • Set the iMac face-up on a table.

  • Starting from the top right corner of the iMac, insert a plastic card between the display and frame.

  • Be careful not to insert it more than 3/8" (9.5 mm), or you may damage internal components.

Si bien la herramienta de apertura hizo la mayor parte del trabajo, la pantalla aún se adherirá ligeramente a la carcasa. Se necesitará una tarjeta de plástico para liberar el último adhesivo.

Coloca el iMac boca arriba en una mesa.

Comenzando desde la esquina superior derecha del iMac, inserta una tarjeta de plástico entre la pantalla y el marco.

Ten cuidado de no insertarlo más de 9.5 mm o podrías dañar los componentes internos.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.