Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 3

Passo 3
Start with strip 13, which goes on the right vertical side of the rear enclosure. Before peeling off any backing, line it up against the frame of the iMac to get an idea of where it goes. Peel the short piece of backing off the back of the strip.
  • Start with strip 13, which goes on the right vertical side of the rear enclosure.

  • Before peeling off any backing, line it up against the frame of the iMac to get an idea of where it goes.

  • Peel the short piece of backing off the back of the strip.

Commencez avec la bande 13, qui est située sur la partie verticale de droite. Avant de décoller une protection de l'adhésif, alignez-le contre le cadre de l'iMac pour avoir une idée de l'endroit où il va.

Décollez le petit morceau de protection à l'arrière de la bande.

[* black] Start with strip 13, which goes on the right vertical.vertical side of the rear enclosure.
[* icon_note]
Before peeling off any backing, line it up against the frame of the iMac to get an idea of where it goes.
[* black] Start with strip 13, which goes on the right vertical.vertical side of the rear enclosure.
[* icon_note]
Before peeling off any backing, line it up against the frame of the iMac to get an idea of where it goes.
[* black] Peel the short piece of backing off the back of the strip.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.