Salta al contenuto principale

Motorola Moto G Stylus 5G (2022) Rückabdeckung tauschen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 2

Passo 2
Motorola Moto G Stylus 5G (2022) Back Cover Replacement, Insert an opening pick: passo 0, immagine 1 di 3 Motorola Moto G Stylus 5G (2022) Back Cover Replacement, Insert an opening pick: passo 0, immagine 2 di 3 Motorola Moto G Stylus 5G (2022) Back Cover Replacement, Insert an opening pick: passo 0, immagine 3 di 3
Insert an opening pick
  • Apply a suction cup to the back cover, as close to the center of the right edge as possible.

  • Pull up on the suction cup with strong, steady force to create a gap between the cover and the frame.

  • Insert an opening pick into the gap.

Bringe einen Saugheber an der Rückabdeckung an, und zwar so nah wie möglich an der Mitte der rechten Kante.

Ziehe den Saugheber mit starker, gleichmäßiger Kraft nach oben, um einen Spalt zwischen der Abdeckung und dem Rahmen zu erzeugen.

Setze ein Plektrum in den Spalt.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.