Cricut Maker Top Door/ Lid Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese

Cinese

Traduzione in corso passo 1

Passo 1

To remove the cover from the connecting joint, use an iFixit opening tool, and pry around the perimeter of the cover to release it.
Applying too much pressure to this can break it as it is very fragile.
There is some adhesive holding the cover, so it may take some patience and finesse to pry the cover off.
Remove the cover from the connecting joint and set it aside.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.