Skip to main content

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 2

Step 2
Use the flat end of a spudger to pry the microphone off the adhesive securing it to the left side of the upper case. If needed, apply a little heat from an iOpener or hairdryer to soften the adhesive. Remove the microphone from the upper case.
  • Use the flat end of a spudger to pry the microphone off the adhesive securing it to the left side of the upper case.

  • If needed, apply a little heat from an iOpener or hairdryer to soften the adhesive.

  • Remove the microphone from the upper case.

Utilisez l'extrémité plate d'un spudger pour décoller le microphone de l'adhésif le fixant sur le côté gauche du boîtier supérieur.

Retirez le microphone du boîtier supérieur.

[* black] Use the flat end of a spudger to pry the microphone off the adhesive securing it to the left side of the upper case.
[* black] If needed, apply a little heat from an iOpener or hairdryer to soften the adhesive.
[* black] Remove the microphone from the upper case.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.