iPhone 14 Plus 后壳替换

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese

Cinese

Traduzione in corso passo 6

Passo 6

Insert an opening pick

Apply a suction handle to the bottom edge of the rear glass, while avoiding the very edge of the glass.
Pull up on the suction cup with firm, constant pressure to create a slight gap between the rear glass and the frame.
Insert an opening pick into the gap.
The adhesive holding the rear glass in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the rear glass up and down to weaken the adhesive until you create enough of a gap to insert your opening pick.

插入三角撬片

将吸柄放在后壳的底部，请避开后壳的最边缘。
用牢固、恒定的压力拉起吸盘，在后壳和边框之间形成微小的间隙。
将撬片插入间隙。
固定后壳的胶水非常牢固；创造出这个初始缝隙需要很大的力量。如果很难创造出缝隙，请施加更多的热量，并轻轻地上下摇动后壳，以软化胶水，直到你创造出足够的缝隙来插入撬片。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.