Aggiusta le tue cose Community Store

iPhone 14 Plus リアガラスの交換

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Giapponese
Passo precedente Passo successivo

Traduzione in corso passo 6

Passo 6
iPhone 14 Plus Rear Glass Replacement, Insert an opening pick: passo 0, immagine 1 di 3 iPhone 14 Plus Rear Glass Replacement, Insert an opening pick: passo 0, immagine 2 di 3 iPhone 14 Plus Rear Glass Replacement, Insert an opening pick: passo 0, immagine 3 di 3
Insert an opening pick

  • Apply a suction handle to the bottom edge of the rear glass, while avoiding the very edge of the glass.

  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the rear glass and the frame.

  • Insert an opening pick into the gap.

  • The adhesive holding the rear glass in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the rear glass up and down to weaken the adhesive until you create enough of a gap to insert your opening pick.

オープニングピックを挿入する

吸盤ハンドルをスクリーンガラスの端ぎりぎりを避けながら、少し開けた端付近に装着します。

吸盤カップをしっかりと一定の力で引き上げて、フレームとリアガラスの間にわずかな隙間を作ります。

隙間にオープニングピックを差し込みます。

スクリーンを固定している接着は非常に強力で、この最初の隙間を作るにはかなりの力が必要です。隙間が開きにくい場合は、再度熱を加え、スクリーンを上下に軽く揺すって粘着力を弱め、オープニングピックを差し込める程度の隙間を作ってください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.